Transmitters are devices that convert physical quantities into electrical signals. They include pressure transmitters and differential pressure transmitters. These transmitters are widely used in industrial applications for measuring and controlling pressure or differential pressure. The following are distinctions and explanations of pressure transmitters, differential pressure transmitters, gauges, and adiabatic and differential pressure gauges.
Pressure transmitter: It is mainly used to measure absolute or gauge pressure inside a single vessel. It outputs an electrical signal, typically 4-20 mA, that is proportional to the measured pressure. Pressure transmitters can measure a variety of media, including gases, liquids, and vapors, with high accuracy and stability.
Differential Pressure Transmitter: Designed specifically to measure pressure differences between two points. It outputs an electrical signal that is proportional to the pressure difference. These transmitters are used in a wide range of applications, including fluid flow measurement, level control, and filter monitoring. They have two input ports, each connected to a different pressure point.
Summary of differences
Measuring Objects: Pressure transmitters measure the absolute or gauge pressure of a single vessel. Differential pressure transmitters, on the other hand, measure the pressure difference between two points.
Areas of application: Pressure transmitters are suitable for monitoring a single pressure point, while differential pressure transmitters are suitable for situations where pressure changes need to be known.
Areas of application: Pressure transmitters are suitable for monitoring a single pressure point, while differential pressure transmitters are suitable for situations where pressure changes need to be known.
Measuring Objects: Pressure transmitters measure the absolute or gauge pressure of a single vessel, while differential pressure transmitters measure the pressure difference between two points.
Application Areas: Pressure transmitters are suitable for monitoring a single pressure point, while differential pressure transmitters are ideal for situations requiring knowledge of pressure changes.
Range selection: When selecting a pressure transmitter, the range is usually determined by multiplying the maximum pressure of the system by 1.5. Differential pressure transmitters are selected according to the actual range of the measured differential pressure.
Working Principle: Pressure transmitters directly measure the pressure of a single point, while differential pressure transmitters output signals by comparing the pressure of two points
Application Scenarios: A gauge pressure meter is suitable for environments that require relative pressure values, an absolute pressure meter is suitable for environments that require absolute pressure values, and a differential pressure meter is suitable for occasions that require the knowledge of pressure changes between two points.
Precautions for Use:
Correct Selection: Select the right type of transmitter according to the actual demand. Consider the pressure type (gauge, absolute pressure, or differential pressure), range, accuracy, and installation environment.
Maintenance: Regularly check and calibrate the transmitter to ensure its accuracy and reliability.
Installation Requirements: Ensure the transmitter is installed correctly to prevent liquid accumulation in the pressure guide tube, which affects measurement accuracy.

