Products Description
The Rosemount 8750W Magnetic Flow Meter reduces lifecycle costs and unplanned shutdowns by accurately measuring water and wastewater flows in a variety of utility applications. The 8750W is supported by intelligent diagnostics that help users take advantage of improved installation, maintenance and process-management practices. With fully welded sensor construction and an isolated, replaceable terminal block the 8750W is the most dependable meter available for utility and water applications.
Features
- Maximize uptime with dual-compartment transmitter housing that isolates electronics from moisture and contamination
- Rely on robust, fully welded construction designed to withstand sustained vibration
- Confirm meter calibration without interrupting the process using continuous meter verification
- Perform easy repairs in the field without the need to replace the entire meter with a replaceable terminal block
- Advanced diagnostic capabilities and printed reports verify meter performance for compliance with regulatory agencies
- Simplify configuration and accessibility with an easy-to-use Local Operator Interface
Key Advantages
1. Excellent Value and Low Cost of Ownership
· Optimized for water applications, it offers a highly competitive initial investment and total cost of ownership while maintaining the reliability of the Rosemount brand.
2. Easy Installation and Maintenance, Saving Time
· Water-Style™ Wiring System features pre-wired modules and quick-connect terminals, greatly simplifying wiring and reducing installation and maintenance time.
· Offers multiple mounting options (flanged, wafer) to suit different piping needs.
3. Reliable Measurement and Low Maintenance
· No moving parts; measurement is unaffected by changes in fluid density, viscosity, or temperature.
· Empty Pipe Detection technology automatically identifies a non-full pipe condition and alarms, preventing erroneous measurement.
· Rugged sensor design and multiple liner options (e.g., Polyurethane) provide abrasion and corrosion resistance, minimizing maintenance.
4. Smart Diagnostics and Communication
· Supports HART protocol for remote configuration, calibration, and troubleshooting, enabling easy integration into monitoring systems.
5. Standard, Off-the-Shelf Solution
· Pre-configured for common utility water applications, ready to meet most requirements out of the box, reducing complex selection and setup processes.
Key Performance Specifications
|
Parameter |
Specification |
|
Measurement Principle |
Faraday's Law of Electromagnetic Induction |
|
Measured Fluid |
Conductive liquids with conductivity ≥ 5 μS/cm |
|
Accuracy |
±0.5% of rate (±0.2% optional) |
|
Repeatability |
±0.1% of rate |
|
Size Range |
DN 15 to DN 1200 (1/2" to 48") |
|
Liner Material |
Polyurethane (Abrasion-resistant, for water with solids), Hard Rubber |
|
Electrode Material |
316L Stainless Steel (Standard) |
|
Sensor Housing |
Cast Iron, Epoxy Coated |
|
Output Signal |
4-20 mA HART, Pulse/Frequency |
|
Power Supply |
100-240 V AC, 50/60 Hz or 24 V DC |
|
Communication Protocol |
HART |
|
Enclosure Rating |
IP67 / NEMA 4X |
Suitable Applications
· Raw Water Intake and Transmission
· Potable Water Treatment and Distribution
· Industrial Cooling Water Circuits (Inlet and Return Lines)
· Power Plant Condensate Make-up
· Wastewater Treatment Plants (Influent, Effluent, Return Activated Sludge)
· Water Reuse/Reclaim Systems
· Irrigation Water Metering
Keywords
Rosemount 8750W,Magnetic Flow Meter,Water Flow Meter,Utility Water Metering,Cooling Water Flow Meter,Raw Water Flow Meter,Water-Style Wiring,Wastewater Flow Meter,Water Management,Cost-Effective Magmeter
Hot Tags: rosemount 8750w magnetic flow meters for utility water applications, China rosemount 8750w magnetic flow meters for utility water applications suppliers, factory, argon flow meter, stainless steel flow meter, petrol flow meter, fluid flow meter, electromagnetic flow sensor, magflow meter
